High Efficiency Downdraft Spray Booth for Automotive Body Painting in Auto Repair Shops and Car Manufacturing Plants with EPA 6h Compliance and HEPA Filtration

Product Description

Product Description

Spray Booth 

Smartspot Industrial Spray Booth is designed to provide high-efficiency spray painting, powder coating, and surface treatment solutions for various industries. Whether for automotive, furniture, metal, or other industrial applications, Smartspot spray booths are engineered to ensure safe, clean, and effective work environments. The booth features excellent air filtration, ventilation, and dust removal systems to ensure high-quality finishes and compliance with environmental standards.

The booth is customizable in size and design, equipped with efficient exhaust systems, airflow management, and LED lighting for optimal visibility during operations. Easy to install and maintain, this spray booth is the perfect choice for both small and large-scale operations.

Specification

Category	Sub-item	Specifications
Base	Ground Layout	The grating is made of 30×4 mm flat steel and 10 mm threaded steel, with a galvanized surface treatment. Load capacity: 600 kg/wheel.Ramp: Built-in pneumatic ramp
	Cover plate	Made of bent galvanized steel plate, 300 mm high.
	Support frame	Made of 40×80 mm (width × length) galvanized square steel tubing.
	Ground filter	A fiberglass filter is laid on the filter frame, grade G3 (EN779), model PA-50, filtration area: 26.91 m².
Spray booth main body	Internal dimensions	6900 × 3900 × 2650 mm (length × width × height)
	External dimensions	7000 × 5350 × 3400 mm (length × width × height)
	Main entrance door	Three-panel folding door, size 3000 × 2600 mm (width × height), made of folded steel plates, without edge covers. The square frame is constructed from color-coated steel plates and embedded with tempered glass.
	Personnel door	One door panel, dimensions 700 × 2000 mm (width × height), with a square frame made of color-coated steel sheet and embedded tempered glass.
	Wall panels	Thickness 50 mm, width 1000 mm. The insulation layer is EPS, covered on both sides with 0.426 mm thick color-coated steel plates. It features a tongue-and-groove interlocking structure, with steel plates covering the sides.
	Roof panels	Made from 0.6 mm thick galvanized steel sheet, bent into shape.
	Overhead lights	Five lampshades are installed on the left and five on the right at the top, totaling 10 lampshades. Each lampshade is equipped with four 36-watt  fluorescent tubes, using a "two-in-one" electronic ballast.
	Side lights	Five lampshades are installed on each side, for a total of 10. Each lampshade is equipped with two 36-watt  fluorescent tubes, using a "two-in-one" electronic ballast.
	Plenum chamber	Standing 450 mm tall, all components are made from bent galvanized steel sheets and coated with white paint to ensure a long service life.
Filtration system	Top filter	The support frame is made of C-shaped steel with an oil-coated surface. The filter is a medium-efficiency filter, class F5 (EN779).
	Exhaust filter	Fiberglass filter, grade G3 (EN779), model PA-50."Pocket" type activated carbon filter, class F5 (EN779), model C16-200.
Control system	Control Panel Functions	Pressure gauge, temperature controller, drying timer, timer, spraying indicator light, thermal spraying indicator light, drying indicator light, fault indicator light, left light indicator light, right light indicator light, spraying switch, thermal spraying switch, drying switch, left light switch, right light switch, power indicator light, start switch, power switch, emergency stop switch.
Air supply system	Frame dimensions	2100 × 1250 × 2200 mm (length × width × height).
	Casing frame	Made from 1.5 mm thick galvanized steel sheet, the three-way connector is made of aluminum alloy.
	Motor and fan	Motor: Direct drive; Quantity: 1 unit; Single unit power: 7.5 KW, Total power: 7.5 KW;Fan type: Single-inlet centrifugal fan, total airflow: 25,000 m³/h.
	Air supply control	The fresh air volume is controlled by a Belimo NMU230 10N actuator.
	Pneumatic actuator	Used to control the opening and closing of the air valve during spraying or drying operations.
	Heat exchanger	Power: 200 KW, made of 1.5 mm thick 1Gr18Ni9Ti (SUS304) stainless steel, featuring circular multi-circulation cooling tubes, equipped with safety explosion-proof vents, and including a 1-meter stainless steel chimney, a 3-meter long galvanized sheet metal bent chimney, and a rain cover.
	Burner	Riello RG5S diesel burner, heating power 260,000 Kcal/h.
	Filter	Pre-filter, class G2 (EN779), model C16-100;Fiberglass filter, class G3 (EN779), model PA-50.
Ventilation system	Frame dimensions	1500 × 1250 × 1150 mm (length × width × height).
	Casing frame	Made from 1.5 mm thick galvanized steel sheet, the three-way connector is made of aluminum alloy.
	Motor and fan	Motor: Direct drive; Quantity: 1 unit; Single unit power: 7.5 KW, Total power: 7.5 KW;Fan type: Single-inlet centrifugal fan, Total airflow: 25,000 m³/h.
	Exhaust control	A manual actuator is used to control the exhaust air volume.Equipped with a 4-meter straight pipe, one 90° elbow pipe, and one 30° elbow pipe.
Power supply voltage: 380V/50Hz(Customizable)

Advantages

Company Profile

Shandong Huidian Import and Export Co., Ltd. specializes in manufacturing industrial spray booths, spray painting equipment, and surface treatment systems. With advanced production facilities and a professional R&D team, we provide customized solutions for paint booths, powder coating booths, and other industrial equipment. Our products are widely used in industries such as automotive, furniture, electronics, metal, and coatings, helping companies achieve high-quality finishing while ensuring a safe and environmentally friendly work environment.We are committed to offering high-quality products with a focus on innovation, customer satisfaction, and reliable after-sales support. Our spray booths have been recognized for their energy efficiency, reliability, and durability, making us a trusted partner for businesses worldwide.

Our partners

Project case

Packaging & Shipping

FAQ

Q1: What industries can use the spray booth?

A1: Our spray booths are suitable for various industries such as automotive, furniture, metalworking, electrical, and coatings.

Q2: How is the air filtration system designed?
A2: The air filtration system is designed with multi-stage filters to effectively capture paint particles, dust, and VOCs, ensuring clean air and high-quality finishes.

Q3: Can I customize the size of the spray booth?
A3: Yes, we offer customized sizes based on your specific needs. The booth can be made to fit your available space and production requirements.

Q4: How do I maintain the spray booth?
A4: Regular maintenance includes cleaning the filters, checking exhaust fans, and inspecting lighting systems. We also provide spare parts and maintenance support.

Q5: Is the spray booth safe to operate?
A5: Yes, our spray booths come equipped with fire suppression systems and safety features such as emergency stops to ensure safe operation.