| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Category | Sub-item | Specifications |
Base | Ground Layout | The grating is made of 30×4 mm flat steel and 10 mm threaded steel, with a galvanized surface treatment. Load capacity: 600 kg/wheel.Ramp: Built-in pneumatic ramp |
Cover plate | Made of bent galvanized steel plate, 300 mm high. | |
Support frame | Made of 40×80 mm (width × length) galvanized square steel tubing. | |
Ground filter | A fiberglass filter is laid on the filter frame, grade G3 (EN779), model PA-50, filtration area: 26.91 m². | |
Spray booth main body | Internal dimensions | 6900 × 3900 × 2650 mm (length × width × height) |
External dimensions | 7000 × 5350 × 3400 mm (length × width × height) | |
Main entrance door | Three-panel folding door, size 3000 × 2600 mm (width × height), made of folded steel plates, without edge covers. The square frame is constructed from color-coated steel plates and embedded with tempered glass. | |
Personnel door | One door panel, dimensions 700 × 2000 mm (width × height), with a square frame made of color-coated steel sheet and embedded tempered glass. | |
Wall panels | Thickness 50 mm, width 1000 mm. The insulation layer is EPS, covered on both sides with 0.426 mm thick color-coated steel plates. It features a tongue-and-groove interlocking structure, with steel plates covering the sides. | |
Roof panels | Made from 0.6 mm thick galvanized steel sheet, bent into shape. | |
Overhead lights | Five lampshades are installed on the left and five on the right at the top, totaling 10 lampshades. Each lampshade is equipped with four 36-watt fluorescent tubes, using a "two-in-one" electronic ballast. | |
Side lights | Five lampshades are installed on each side, for a total of 10. Each lampshade is equipped with two 36-watt fluorescent tubes, using a "two-in-one" electronic ballast. | |
Plenum chamber | Standing 450 mm tall, all components are made from bent galvanized steel sheets and coated with white paint to ensure a long service life. | |
Filtration system | Top filter | The support frame is made of C-shaped steel with an oil-coated surface. The filter is a medium-efficiency filter, class F5 (EN779). |
Exhaust filter | Fiberglass filter, grade G3 (EN779), model PA-50."Pocket" type activated carbon filter, class F5 (EN779), model C16-200. | |
Control system | Control Panel Functions | Pressure gauge, temperature controller, drying timer, timer, spraying indicator light, thermal spraying indicator light, drying indicator light, fault indicator light, left light indicator light, right light indicator light, spraying switch, thermal spraying switch, drying switch, left light switch, right light switch, power indicator light, start switch, power switch, emergency stop switch. |
Air supply system | Frame dimensions | 2100 × 1250 × 2200 mm (length × width × height). |
Casing frame | Made from 1.5 mm thick galvanized steel sheet, the three-way connector is made of aluminum alloy. | |
Motor and fan | Motor: Direct drive; Quantity: 1 unit; Single unit power: 7.5 KW, Total power: 7.5 KW;Fan type: Single-inlet centrifugal fan, total airflow: 25,000 m³/h. | |
Air supply control | The fresh air volume is controlled by a Belimo NMU230 10N actuator. | |
Pneumatic actuator | Used to control the opening and closing of the air valve during spraying or drying operations. | |
Heat exchanger | Power: 200 KW, made of 1.5 mm thick 1Gr18Ni9Ti (SUS304) stainless steel, featuring circular multi-circulation cooling tubes, equipped with safety explosion-proof vents, and including a 1-meter stainless steel chimney, a 3-meter long galvanized sheet metal bent chimney, and a rain cover. | |
Burner | Riello RG5S diesel burner, heating power 260,000 Kcal/h. | |
Filter | Pre-filter, class G2 (EN779), model C16-100;Fiberglass filter, class G3 (EN779), model PA-50. | |
Ventilation system | Frame dimensions | 1500 × 1250 × 1150 mm (length × width × height). |
Casing frame | Made from 1.5 mm thick galvanized steel sheet, the three-way connector is made of aluminum alloy. | |
Motor and fan | Motor: Direct drive; Quantity: 1 unit; Single unit power: 7.5 KW, Total power: 7.5 KW;Fan type: Single-inlet centrifugal fan, Total airflow: 25,000 m³/h. | |
Exhaust control | A manual actuator is used to control the exhaust air volume.Equipped with a 4-meter straight pipe, one 90° elbow pipe, and one 30° elbow pipe. | |
Power supply voltage: 380V/50Hz(Customizable) | ||
){kind=link}